- –2-in-1 car battery tester: BM560 car battery tester can work on all 6V and 12V 100-2000 CCA 2AH-220AH batteries.
- –The battery analyzer uses the latest conductivity method to measure.
- –The tester will scan the battery and give you accurate test results within 3 seconds.
- –Battery Health Check: Including load voltage, no-load voltage, ripple state, internal resistance test, voltage test, state of health (SOH), state of charge (SOC) and CCA value test.
- –Simple and Safe Operation.
.
Feature:
1. 2-in-1 car battery tester: BM560 car battery tester can work on all 6V and 12V 100-2000 CCA 2AH-220AH batteries, such as ordinary flooded type, AGM flat type, AGM spiral type, gel type and Deep cycle battery. Compatible with cars, motorcycles, trucks, RVs, ATVs, SUVs, boats, yachts, lawn mowers and even golf carts. Test results are based on CCA, EN, CA, MCA, DIN, SAE, JIS and IEC standards.
2. Startup and Charge Test: Display the decision of startup system, startup voltage and startup time in milliseconds. In addition, the battery diagnostic tool can check the 6V or 12V charging system to ensure that the generator output voltage is normal, the rectifier diodes are working properly, and the charging current is normal.
3. Simple and Safe Operation: Clear buttons and color screen operation make the operation easier; the metal alligator clip of the battery tester is covered with a rubber sleeve for protection; reverse connection protection design, no safety hazards. Even beginners can easily use the battery tester.
4. 11 languages: English, Russian, French, Spanish, German, Italian, Portuguese, Dutch, etc.
Description:
Name: Battery Tester
Main features of BM560 battery load tester:
1. Large capacity: suitable for 6V and 12V batteries, battery ratings from 100 – 2200 CCA, also for starters and alternators;
2. Test a variety of battery types: conventional submerged, AGM flat, AGM spiral and gel;
3. Color screen, support in-vehicle and out-of-vehicle testing, no need to remove the battery;
4. Test standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB;
5. Test results: SOH, SOC, CCA value, CCA level, voltage, internal resistance, etc.;
6. Provide reliable results within a few seconds, display suggestions according to the test results (Good, Recharge, Replace), and directly detect bad batteries;
7. Reverse polarity protection; reminder light
8. Support 11 languages: English, Russian, French, Spanish, German, Italian, Portuguese, Dutch, etc.
9. Suitable for car factories, garages, car battery manufacturers, DIY enthusiasts, etc.
Packing list:
1 x Battery Tester
Note:
1. Due to manual measurement, please allow 1-3cm error. Make sure you don't mind before bidding.
2. Due to the difference of different monitors, the picture may not reflect the actual color of the product. Thanks.
.
